相转移催化氧化合成苯甲酸

苯甲酸一般由甲苯氧化而成 ,工业上采用液相空气氧化生产苯甲酸[1 ] 。ＫＭｎＯ4氧化甲苯制备苯甲酸的方法是在实验室中最常见的一种方法[2 ] ,该法的优点是反应条件温和 ,操作简便 ;其缺点是反应时间长 ,产率低 (低于 40 % ) [3] 。为了提高ＫＭｎＯ4氧化法的产率 ,本文采用十六烷基三丁基溴化磷 (ＨＤＴＢＰ)和苄基三乙基氯化铵(ＢＴＥＡ)作相转移催化剂氧化甲苯制备苯甲酸 ,具有时间短 ,收率高等优点。同时又考虑到ＨＤＴＢＰ的催化效果虽然好 ,但价格昂贵 ,因此本文采用价廉易得的苄基三乙基氯化铵 (ＢＴＥＡ)作相转移催化剂氧化甲苯制…     

Density Functional Theory Study on the Adsorption of Dioxygen on Small Pt-Pd Clusters

1 INTRODUCTION The bimetallic nanoclusters are of standing inte- rest since they can exhibit catalytic, electronic and optical properties distinct from those of corre- sponding pure nanoclusters[1～4]. Palladium and pla- tinum, well known for their catalytic properties, are often used as the catalyst in different fuel cells[5～8]. Several experimental results illustrate that for the oxygen reduction reaction (ORR), which is one of the primary reactions taking place in many fuel cells and…     

超分子体系中的分子识别研究 Ⅴ.单-[6-(1-吡啶)-6-脱氧]-α-和γ-环糊精对氨基酸分子识别的热力学性质

本文用分光光度滴定法测定了单-[6-(1-吡啶)-6-脱氧]-α-和γ-环糊精(1)和(3)与一系列氨基酸在磷酸缓冲溶液中(pH=7.20),25.0～40.0℃时形成超分子体系的稳定常数,进而计算了配位焓和配位熵,并与单-[6-(1-吡啶)-6-脱氧]-β-环糊精(2)的实验结果作了比较.化学计量法表明,所有的氨基酸均与环糊精衍生物形成了1:1的超分子体系.从热力学的观点,讨论了化学修饰环糊精和客体氨基酸的尺寸或形状适合、疏水效应、范德华力和氢键等几种弱相互作用力对形成超分子体系的贡献.研究结果发现,具有正电荷环糊精衍生物的吡啶基,作为一种分子探针不仅可以识别氨基酸生物分子的尺寸或形状之间的差异,而且还可以识别L/D-型手性对映体之间的差异,进一步表明了主-客体间的诱导楔合、几何互补在分子受体选择性键合底物形成超分子体系中的重要作用.     

Theoretical Study on the Structures and Stability of Isomers and Complex of[Si,C,O,O] Sytem

A detailed singlet potential energy surface(PES) of [Si,C,O,O] system including a van der Waals (vdW) comples SiO……CO2,eight isomers,and twelve transiton states is investigated by MP2 and QCISD(T) (single-point)methods.At the final QCISD(T)/6-311 G(2df)//MP2/6-311G(d) level with zero-point energy included,the complex SiO……CO is found to be thermodynamically and kinetically the most stable species.Although eight ismoers are located as local energy minima,they are rather unstable toward isomerization to the dissociation fragments or comples.For the reaction of silocon atoms with carbon dioxide,two competitive reaction channels are found,and the primary pathway,which leads to the products of SiO and CO fragments,is the direct oxygen-abstraction process from carbon dioxide by silicon atom with a41.16 kJ/mol reaction barrier height.Our predications are in good agreement with previous experimental and theoretical studies.     

紫外分光光度法测定川芎中内酯的总量

建立中药川芎中总内酯的测定方法. 采用紫外分光光度法, 以瑟丹酸内酯为对照品, 在一定条件下吸光度和瑟丹酸内酯的浓度呈良好的线性关系. 该方法可作为川芎中总内酯的半定量质量控制方法.     

微色谱柱分离/ICP-AES测定环境样品中的痕量硼

本文采用色谱系统对水样品（温泉水、卤水）中的硼进行分离富集，探讨了影响其分离富集的条件。实验表明，在pH＝8条件下，硼可被树脂完全吸附，用3mL 1mol/L硫酸可以从吸附术上完全解吸硼，浓缩物用ICP－AES进行测定，所建立的方法简便、准确，适合于含盐量高及其它水样品中微量硼的测定。     

毛细管区带电泳法测定抗病毒口服液中连翘苷和梓醇含量

1　引　　言抗病毒口服液是治疗病毒性疾患的口服制剂 ,具有清热祛湿 ,凉血解毒的功能。由于成分复杂 ,采用ＨＰＬＣ法分析时样品前处理繁琐。本文采用高效毛细管电泳法 (ＨＰＣＥ)对抗病毒口服液中连翘苷和梓醇进行了定量分析。该法分离效率高 ,操作便捷 ,经济实用。2　实验部分2 1　仪器和试剂　ＶＵＶ 2 0毛细管电泳紫外检测器 (美国ＨｙｐｅｒＱｕａｎ公司 ) ;日立 6 5 5 15液相泵和日立 6 5 5 16可变波长紫外检测器。数据由江申工作站记录 (大连江申分离科学公司 )。石英毛细管 (河北永年光纤厂 ) 6 5ｃｍ× 75 μｍｉ.ｄ .,有效长…     

烯烃氢甲酰化催化剂活性物种的原位1H NMR研究

The rhodium-phosphine complex catalyst Rh(CO)(acac)(PPh3)(Ⅰ) for 1-hexene hydroformylation was studied under the following reaction conditions: CO/H2=1(mole rate), pressure 1.0 MPa, temperature 25-120℃, by using the pressurized in-situ 1H NMR technique. Experimental results indicated that the formation of a rhodium hydride complex from (Ⅰ) began at room temperature and its amount increased with increasing of reaction temperature. This intermediate complex began to decompose at 100℃ and disapeared completely at 120℃. The intensity change of the proton signal was parallel to catalytical activity in hydroformylation of olefins. Under pure CO pressure the proton signal of Ph-H bond was not observed. There was a 0.2 ppm difference in proton chemical shifts of Rh-H bond under pure H2 pressure and under H2+CO pressure. The results showed that the rhodium-hydride carbonyl complex is the active intermediate in the industrial hydroformylation process.     

脱铝八面沸石的研究(Ⅳ)——异丙苯催化裂化

以脉冲微型反应技术研究了脱铝八面沸石对异丙苯的催化裂化行为,并与反应条件下表面酸性进行了关联。样品裂化活性随骨架Si/Al比增加呈山峰形变化,Si/Al=5.38时最大;反应条件下酸中心数随脱铝深度增加却单调降低。动力学数据表明,样品裂化反应速度常数与强质子酸中心数随骨架Si/Al比增加具有平行的山峰形变化规律,Si/Al比为8.87附近的样品最高。